Sequoia LISST-100X, User Manual

Page: 86 / 144

74 LISST-100X User’s Guide
10

Clicking the OK button will then open the Terminal window
to start the program. The program on the instrument is
configured but not running. To start the program and have it
start looking for the Start conditions press the
Run button on
the Terminal window. The Run button is equivalent to typing
RUN and pressing Enter from any terminal program.
11

The Base Program will display text to the screen as it is
running to confirm that it is running and to indicate where it
is in the sampling cycle. Once the program is confirmed to
be running and waiting for the correct start conditions, the
LISST-SOP program can be closed and the communications
cable can be disconnected. Be sure to replace the
connector cap before deployment.
.