GPS
If you radio is fitted with a GPS module it can obtain its position from GPS
and GLONASS satellites. The GPS functionality allows for both time- or
distance-based reporting.
The behaviour of the GPS function is highly customisable, both by
customisation and over the air from a control room application. Your radio
may also be customised to send position data automatically alongside TETRA
Alarm Calls or Status messages. The destination to which the GPS reports are
sent may be changed over the air. If your radio accepts a change of GPS
destination command it sounds a customisable tone and receives an SDS
message to inform you.
Tip:
If customised, you can enable/disable the GPS function, see
GPS
reporting options
on page 84
.
Note:
GLONASS is only supported on SRG3900 radios with serial
numbers whose 4th digit is ‘C’ or above (that is, beginning with ‘2PNC’.)
Tip:
for the best GPS performance your radio needs an uninterrupted
view of the sky.
GPS position
To locate your GPS position
1. Select
Menu
>
GPS
>
Position
>
Locate
.
While the position is being calculated the
GPS icon flashes.
Position information
When the position has been determined the following information is
displayed:
82
SCC – 03/2016
Summary of Contents for SCC
Page 1: ...User Guide SCC colour console ...
Page 6: ...vi SCC 03 2016 ...
