DMO Mode
In Direct Mode Operation (DMO), radios communicate directly with other
TETRA radios without using a network. The radios must all switch to DMO
and select the same talkgroup, and that talkgroup must use the same channel
(frequency). Communications to other users on the network are impossible
unless they also switch to DMO and select the same talkgroup.
Note:
This means that in DMO, communications to the dispatcher is
impossible unless they also switch to DMO and select the same talkgroup,
or if they communicate through a
DMO gateway
(see
DMO gateway
operation
on page 71
).
Group calls
DMO supports group calls (see
Group calls
on page 43
) which are made and
received in the same way as radios operating in TMO. In DMO TETRA Alarm
Calls are either sent to the currently selected DMO talkgroup or (if
customised) may switch to TMO to make the call. If TMO is unavailable
Alarm Calls are made using DMO. See
Emergency operation
on page 14
.
Individual calls
Your radio can be customised to allow you to make individual calls to other
radios working in DMO which are attached to the same talkgroup. In this
case individual calls are initiated by pressing the PTT key. See
Making
individual calls (half-duplex mode)
on page 45
. (Individual calls to radios which
have selected different DMO talkgroups are prevented unless the DMO
talkgroups have the same carrier frequency.)
Your radio can also be customised to allow you to select a
channel only
talkgroup. If you select a channel only talkgroup
your radio cannot make or
receive group calls
: it can only make or receive individual calls.
Tip:
You can enable
Presence Checking
so that your radio checks
whether the receiving radio is available to receive when you attempt an
Individual call. See
DMO options
on page 70
.
68
SCC – 03/2016
Summary of Contents for SCC
Page 1: ...User Guide SCC colour console ...
Page 6: ...vi SCC 03 2016 ...
