Sepura SCC User Manual Download Page 54

Page: 54 / 98

Missed events

The Missed Events screen shows the number of Messages, Calls and Callouts
that have been missed. Items in

Bold

are unread. Missed Events is only

available when operating in Hi Colour mode.

Warning:

If your radio has the user profile

Group Focus

selected, any

calls to it are not recorded as Missed Calls. See

User profiles

on page 79

To open the list

Press the Missed Events key (usually the top-right-front soft key next to the

Select/Send

key or the appropriate soft key if a different one has been

customised) from any screen.

To close the list

Press the

Cancel

context key.

To view the message, call or Callout information

Select the required option from the list using the

and

Down

navigation

keys.

To clear all messages or events

1. Display the Missed Events box.

2. Press and hold the Missed Event soft key. A pop-up box is displayed.

3. Use the

and

Down

navigation keys to highlight the required option the

press the

Select

context key.

Quick Calls

A Quick Call allows you to request help or information in a non-emergency
situation.

To initiate a Quick Call

1. Press a pre-configured soft key.

2. Press the

PTT

to transmit.

Depending on the configuration this causes all or some of the following to
happen:

SCC – 03/2016

Summary of Contents for SCC



































































































Search results

Summary of Contents for SCC

Reviews:

Related manuals for SCC

Brands by name

Popular brands

Sepura SCC, User Manual

Search results

Summary of Contents for SCC

Reviews:

Related manuals for SCC

Brands by name

Popular brands