CHAPTER 5. CONFIGURING ALTUS NR3 AS A BASE STATION
Step 3: Configure output of differential corrections
On the
Corrections Output
window, you can select the type, number and rate of differential
corrections that you want to send to the rover receiver. The particular messages necessary
for RTK and DGNSS are selected by default. Selecting
DCL1
as the Connection Port will as
shown in Figure 5-5, the receiver will send out correction data to any rover receiver that
connects on a data call.
Figure 5-5:
Output of RTCMv3 differential corrections over the DC1 connection of
the base station receiver
50
Summary of Contents for ALTUS NR3
Page 1: ...Altus NR3 User Manual ...
