CHAPTER 5. CONFIGURING ALTUS NR3 AS A BASE STATION
Configure the correction stream
On the
Corrections Output
window, click on
New RTCM3 output
as shown in Figure 5-9.
You can then select the IPS connection con
fi
gured in the previous step. The messages
necessary for RTK and DGNSS are selected by default
but you can select any combination
of correction messages that you want to output.
Figure 5-9:
Output RTCMv3 diff corr on the con
fi
gured TCP/IP server port of the
Base station receiver
2
Note that if you do not have permissions for RTK Base corrections, you will only be allowed to output RTCM2
DGPS messages
53
Summary of Contents for ALTUS NR3
Page 1: ...Altus NR3 User Manual ...
