CHAPTER 3. GETTING STARTED WITH THE ALTUS NR3
3.2 Setting up the Altus NR3
3.2.1 Inserting a micro SIM card
Turn off the Altus NR3 to install or remove the SIM card. Damage to the SIM
card may occur if installed or removed while the unit is powered.
1. Place the Altus NR3 on a
fl
at surface with its battery compartments facing up as shown
in Figure 2-3
2. Open the SIM card compartment via the battery compartment
3. Place the micro SIM card face down in the SIM card compartment and slide it gently
towards the front panel of the Altus NR3 until a click sound is heard
4. Gently close the SIM card compartment
3.2.2 Inserting the batteries
1. Place the two batteries in their compartments with the positive ends pointing to the
front panel of the Altus NR3
2. Close the two battery doors. The doors click audibly when latched.
3. NOTE: when working at temperatures below -20Â
ř
C / -4Â
ř
F and above +50Â
ř
C / 122Â
ř
F the device needs to be powered via an external power supply, such as the AC adapter.
3.2.3 Switching on the Altus NR3
Click the power button once to switch on the Altus NR3.
•
It takes about
20 seconds
for the Altus NR3 to fully boot up
•
It is advised to avoid pressing the power button during the start-up sequence
•
The front-panel LEDs will follow a boot sequence on start up and will not indicate their
correct status till the unit has fully booted
22
Summary of Contents for ALTUS NR3
Page 1: ...Altus NR3 User Manual ...
