1
2
Select
System Setup
.
Press
Menu
on
your remote,
and then select
Parental, Fav’s &
Setup
.
DIRECTV
®
Receiver Setup for SK-3005
4
3
5
Select
Continue
.
7
8
For Help, Call 1-800-788-4417
The following instructions assume that the TRAV’LER
®
antenna has found and locked onto satellites 101°,
110° and 119°. There should be an asterisk next to 101°, 110°, and 119° on the TRAV’LER interface.
In most DIRECTV receivers, the setup is done through the “Repeat Satellite Setup” option in your receiver
menu. The following instructions are based upon an H24 receiver. If your receiver differs from the options
shown, you may need to consult your receiver manual. The wording and display used in your receiver
may differ slightly.
In your receiver
Menu, you will
need to identify
the Satellite
Menu. The
Satellite Menu
will have an
option for
Satellite Setup
.
You may be
required to press
the
DASH (-)
before proceeding
(underneath #7 on
the remote).
Set Dish Type for
04: Slimline-5
.
Set the Switch
Type for
02: Multiswitch
.
Press
Continue
.
6
Your installation
will be verified.
Errors may be
displayed on the
Installation Status
screen. This is
normal to see one
or two boxes with
an X instead of a .
Select
Continue
.
