Sentek Diviner 2000, User Manual

Page: 34 / 88

Part 1—The Diviner 2000 display unit and probe
Formatting the Diviner 2000
Page 28 ACN 007 916 672

Sentek Pty Ltd
Ø
To delete all data points from
SINGLE
or
SUMMED
mode
1. Move the vertical dashed line so that it highlights any data point.
2. Press
DELETE
five times.
After the fifth time the following prompt will appear:
'Delete all data records? Press enter for yes, any other key for no'.
3. Press
ENTER
to delete data.
Ø
To delete an entire profile from CALIBRATE mode
1. Select the profile.
2. Scroll down until Datum is highlighted.
3. Press DELETE three times.
After the third time a message appears warning that further key presses
will result in the selected profile being deleted.
4. To delete continue to press DELETE twice .
Formatting the Diviner 2000
Warning:
Formatting the Diviner 2000 removes all setup information entered.
This includes probe normalization, all profiles and their data.
Please backup any data on the Diviner unit before formatting.
Enabling the unit configuration menu item
Ø
To enable the unit configuration
1. Turn on the Diviner 2000.
2. At the start up screen, press #2020.
3. Press the ‘setup’ key to display the setup screen.
4. A new menu option will be available called ‘Unit Configuration’.