Sentek Diviner 2000 User Manual Download Page 58

Page: 58 / 88

Part 2 Diviner 2000 Utilities software

The Diviner 2000 Utilities main window

Page 52

ACN 007 916 672



Sentek Pty Ltd

Click

Apply

to apply the changes to the software.

A message box displays, advising you to restart the software for the
changes to take effect.

Click

to close the message box.

Close the

Diviner 2000 Utilities

and restart it.

To prepare for communications

Connect a serial RS-232 cable between the diviner and the PC.

Note:

Record which communication port the cable is connected to on

the PC, e.g. COM1.

Turn on the

Diviner 2000

and press

SETUP

The

Setup Mode

menu displays.

Use the up/down arrow keys to highlight

Serial Baud Rate

in the

menu.

Use the left/right arrow keys to select the appropriate baud rate.
The baud rate setting in

Diviner 2000 Utilities Settings

must match

the baud rate of the

Diviner 2000

serial port. Start with the highest

rate (34800).

Start the

Diviner 2000 Utilities

software and select the

Settings

tab.

Change the Diviner 2000 Utilities baud rate to match the rate selected
in Step 4.

Note:

reduce the baud rate in the Diviner 2000 and in Diviner Utilities if

the communication does not appear to be reliable.

Backing up Diviner 2000 data

The

Backup

tab of the

Diviner 2000 Utilities

main window is used to

backup data from the

Diviner 2000

display unit to a backup file. The

Diviner 2000

display unit must be connected to a serial port of the PC

before backup can begin. See

Establishing communications

on page 50.

Summary of Contents for Diviner 2000

























































































Search results

Summary of Contents for Diviner 2000

Reviews:

Related manuals for Diviner 2000

Brands by name

Popular brands

Sentek Diviner 2000, User Manual

Search results

Summary of Contents for Diviner 2000

Reviews:

Related manuals for Diviner 2000

Brands by name

Popular brands