Sentek Diviner 2000 User Manual Download Page 79 | Manualshive

Page: 79 / 88

background image

Appendix D—Software License Agreement



Sentek Pty Ltd

ACN 007 916 672

Page 73

Appendix D—Software License Agreement

Software License Agreement

PLEASE CAREFULLY READ THE FOLLOWING TERMS AND
CONDITIONS, SIGN THE REGISTRATION CARD WHERE
INDICATED, AND RETURN TO SENTEK.

SOFTWARE LICENSE AGREEMENT (Single User)

I.

LICENSE

1.1

Sentek Pty Ltd. ('Sentek') grants you, the Licensee, a limited non-
exclusive license to use the software program Diviner 2000 Utilities
('Software') and accompanying user manual under the terms and
conditions of this License. Licensee shall not use, copy, modify,
sublicense, sell or transfer the Software or user manual or any portion
thereof except as provided in this License.

1.2

Licensee may:

i)

install and use the Software in machine-readable,

compiled Object Code form on a single computer terminal; and

ii)

copy

the Software only for the purposes of installing and using the Software
on a single computer as described above. Licensee may make only one
copy of the Software and user manual for backup or archival purposes.

1.3

Licensee shall not:

i)

sublicense the Software;

ii)

reverse engineer,

decompile or disassemble the Software;

iii)

make derivatives,

modifications, or translations of the Software or user manual; or

iv)

copy

the Software or user manual, in whole or in part, except as provided in
this License.

II.

OWNERSHIP AND COPYRIGHT OF SOFTWARE

2.1

Licensee acknowledges that all rights, title and interest to the Software
and user manual remain with Sentek. The Software and user manual are
copyrighted and protected by the laws of Australia and other countries,
and international treaty provisions. Copyrighted material includes all
forms and matters of copyrightable material and information now
allowed by statutory or common law or hereinafter granted, including
without limitation, material generated from the Software that is
displayed on the screen such as icons and screen displays. Any backup
and archival copies made by Licensee shall be the sole and exclusive
property of Sentek. Licensee shall not remove any proprietary or
copyright notice from the Software or user manual. With respect to
installation and backup copies, Licensee will reproduce and include all

«
...
77
78
79
80
81
...
»

Summary of Contents for Diviner 2000

























































































Reviews:

No comments

Related manuals for Diviner 2000

Brand: Abbott Pages: 296

Brand: DAVIS Pages: 12

POCKET COLORIMETER II

Brand: Hach Pages: 188

CP-4900 Micro-GC

Brand: Varian Pages: 13

Brand: ZHYQ Pages: 6

Brand: Bamo Pages: 17

Brand: Keller Pages: 8

Brand: Hanna Instruments Pages: 15

Brand: horiba Pages: 10

Brand: WAGNER Pages: 4

Brand: GW Instek Pages: 91

Brand: Seli Pages: 68

Brand: netAlly Pages: 2

Brand: Clas Ohlson Pages: 4

Brand: Masimo Pages: 52

Brand: Triacta Pages: 40

Brand: Futech Pages: 68

Brand: LaserLiner Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands