manualshive.com logo in svg

SENSYS SBL10, Manual, Page: 6 / 69

Share
Download
SENSYS SBL10 Manual Download Page 6

+49 33631 59 650
[email protected]
w w w .sensys.de

Manual
SBL10

6 / 69

Version 1.27

1. Redistributions of source code must retain the above copyright notice, this list of conditions and
the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions
and the following disclaimer in the documentation and/or other materials provided with the
distribution.

3. The name of the author may not be used to endorse or promote products derived from this
software without specific prior written permission.

This software is provided by the author as is and any express or implied warranties, including, but
not limited to, the implied warranties of merchantability and fitness for a particular purpose are
disclaimed. In no event shall the author be liable for any direct, indirect, incidental,
special,exemplary, or consequential damages (including, but not limited to, procurement of
substitute goods or services; loss of use, data, or profits, or business interruption) however caused
and on any theory of liability, whether in contract, strict liability, or tort (including negligence or
otherwise) arising in any way out of the use of this software, even if advised of the possibility of
such damage.

Summary of Contents for SBL10






































































Reviews:

No comments