SL MCR DW
92
All LEDs are red
▷
There is no radio link to a transmitter for any of the channels.
All LEDs are flashing red
▷
A device error has occurred. Details are shown in the
Control Cockpit
.
or
▷
An error occurred while updating the device firmware. Details are
shown in the
Control Cockpit
.
A channel's LED is green
▷
A radio link to the transmitter is established.
A channel's LED is flashing green
▷
The
Identify
function for this channel was initiated in the
Control Cock-
pit
.
The LED of the received transmitter also flashes.
A channel's LED is yellow
▷
The received transmitter has been muted with the
MUTE
switch.
A channel's LED is flashing yellow
▷
The received transmitter is performing a firmware update.
A channel's LED is red
▷
No radio link to a transmitter.
A channel's LED is flashing red
▷
An error has occurred in this channel. Details are shown in the
Control
Cockpit
.
or
▷
An error occurred while updating the transmitter firmware. Details are
shown in the
Control Cockpit
.
A channel's LED flashes red and green in alternation
▷
Pairing
mode is active for this channel.
