SL MCR DW
91
Meaning of the status LEDs
The four LEDs display status information for the device as a whole or for
one of the two or four microphone channels.
When the LEDs are displaying the status of the entire device and not the
individual channels, all four LEDs (SL MCR 4 DW variant) or the first two
LEDs (SL MCR 2 DW variant) will light up or flash.
The LEDs for each individual channel display status messages for the cor-
responding radio connection.
Also note the additional information in the
Control Cockpit
.
All LEDs are green
▷
After the power supply is switched on:
The device is starting (approx. 20 seconds). Afterwards the status in-
formation is displayed.
All four LEDs light up green during startup even with the two-channel
variant SL MCR 2 DW.
▷
During operation:
A radio link to the transmitters has been established for all channels.
All LEDs are flashing green
▷
The
Identify
function for the entire device was initiated in the
Control
Cockpit
.
All LEDs are yellow
▷
All received transmitters have been muted with the
MUTE
switch.
All LEDs are flashing yellow
▷
The device is performing a firmware update.
Kanal 4
Kanal 3
Kanal 2
Kanal 1
Variante: SL MCR 4 DW (4 Kanäle)
keine Funktion
keine Funktion
Kanal 2
Kanal 1
Variante: SL MCR 2 DW (2 Kanäle)
