Pairing
138
Pairing a receiver with a transmitter
To establish a new radio link between a receiver and a transmitter, proceed
as follows:
SL Rack Receiver DW
▷
Long-press the
PAIR
button of the receiver until its status LED flashes
alternately green and red.
or
▷
Press the
Pair
button of the desired device from the
device list
in the
Control Cockpit
.
►
First,
Identify
appears on the display panel of the receiver. The
Pairing
message then appears.
Any existing radio link is now disconnected.
You now have 90 seconds to establish a radio link with a new transmit-
ter.
▷
Long-press the
PAIR
button of the corresponding transmitter until its
status LED flashes alternately green and red.
The
Press pair on receiver
message appears on the display panel of
the transmitter (SL Handheld DW and SL Bodypack DW only).
Once the radio link is successfully established,
Paired
appears on
the display panel of both the receiver and the transmitter (only for
SL Handheld DW and SL Bodypack DW) and the status LEDs on the
transmitter and the receiver light up green.
If no radio link was successfully established,
Pairing failed
appears
on the display panel of both the receiver and the transmitter (only
for SL Handheld DW and SL Bodypack DW) and the status LEDs on
the transmitter and the receiver light up red.
If you try to pair devices that are running incompatible firmware versions,
a message appears on the display panel prompting you to update the firm-
ware of the transmitter.
If you update the firmware now, the transmitter and the receiver will be
paired afterwards.
