SL Rack Receiver DW
62
Setting up the receiver
This sections describes how to set up the receiver.
You can also install the receiver in a fixed location, e.g. in a 19" rack. You
can find more information about installing the receiver in a fixed location
under: „Installing receivers in a rack“.
Affixing the device feet
Only affix the device feet if you are setting the receiver up in the stand-
alone position instead of installing it in a 19" rack. The device feet will get
in the way if the receiver is installed in a rack.
To affix the device feet:
▷
Clean the recesses for the device feet at the base of the receiver.
▷
Affix the device feet to the recesses of the receiver.
▷
Place the receiver on a flat, horizontal surface.
The device feet will adhere reliably to the receiver only after some time.
Avoid moving the receiver during this time.
ATTENTION
Risk of staining furniture surfaces
The device feet my leave stains if they come into contact with furniture.
▷
Do not place the receiver on delicate surfaces.
Attaching the mounting angles
The mounting angles are designed to help protect the operating elements
from damage or deformation, e.g. if the receiver is dropped. We therefore
recommend always attaching the mounting angles, even if you do not want
to mount the receiver into a rack.
To fasten the mounting angles:
▷
Unscrew and remove the two recessed head screws on each side of the
receiver.
▷
Secure the mounting angles to the sides of the receiver using the pre-
viously removed recessed head screws.
Make sure that the angled ends of the mounting angles point forward.
