Sennheiser SpeechLine Digital Wireless Series System Documentation Download Page 17

Page: 17 / 188

The Products of the SpeechLine Digital Wireless Series

The wireless SL Boundary 114-S DW

►

The wireless SL Boundary 114-S DW boundary microphone is designed for
your speech.

Because it is completely cable free, the SL Boundary 114-S DW is extremely
versatile and suited for a wide range of applications.

The SL Boundary 114-S DW can be charged either wirelessly or via USB.
The CHG 2W wireless charging base for two mobile devices is available
separately. The SL Boundary 114-S DW is delivered with a rechargeable
battery that lasts up to 10 hours.

The Sennheiser Control Cockpit software can be used to monitor and con-
trol the wireless boundary microphone remotely.

For information about installation and operation, see the instruction man-
ual: „The SL Boundary 114-S DW“

Summary of Contents for SpeechLine Digital Wireless Series





























































































































































































Search results

Summary of Contents for SpeechLine Digital Wireless Series

Reviews:

Related manuals for SpeechLine Digital Wireless Series

Brands by name

Popular brands

Sennheiser SpeechLine Digital Wireless Series, System Documentation

Search results

Summary of Contents for SpeechLine Digital Wireless Series

Reviews:

Related manuals for SpeechLine Digital Wireless Series

Brands by name

Popular brands