Pairing
139
If you do not update the firmware, the transmitter and the receiver will not
be paired and
FW mismatch
appears on the display panel of the receiver.
We recommend updating the receiver firmware first and then the transmit-
ter firmware.
SL MCR DW
▷
Press the
Pair
button of the desired device from the
device list
in the
Control Cockpit
.
►
First,
Identify
appears on the display panel of the receiver. The
Pairing
message then appears.
Any existing radio link is now disconnected.
You now have 90 seconds to establish a radio link with a new transmit-
ter.
▷
Long-press the
PAIR
button of the corresponding transmitter until its
status LED flashes alternately green and red.
The
Press pair on receiver
message appears on the display panel of
the transmitter (SL Handheld DW and SL Bodypack DW only).
Once the radio link is successfully established,
Paired
appears on
the display panel of the transmitter (only for SL Handheld DW and
SL Bodypack DW) and the status LEDs of the transmitter and the
receiving channel light up green.
If no radio link was successfully established,
Pairing failed
appears
on the display panel of the transmitter (only for SL Handheld DW
and SL Bodypack DW) and the status LEDs of the transmitter and
the receiving channel light up red.
If you try to pair devices that are running incompatible firmware versions,
a message appears in the Control Cockpit prompting you to update the
firmware of the transmitter.
If you update the firmware now, the transmitter and the receiving channel
will be paired afterwards.
If you do not update the firmware, the transmitter and the receiving chan-
nel will not be paired.
We recommend updating the receiver firmware first and then the transmit-
ter firmware.
