Figure 5.19
RS485 wiring diagram
Step 1 Remove an appropriate length of the insulation layer from the cable using a
wire stripper, as shown in Figure 5.20.
Figure 5.20
Stripping an RS485 communications cable (unit: mm)
Step 2
Remove the screws at the inverter bottom to remove the metal plate, shown in
Figure 5.21.
Figure 5.21
Removing the metal plate
Step 3
Take RS485 cable out of accessory kit, and remove the locking caps from the
485 IN
and
485 OUT
waterproof cable connectors. Route RS485 cables through
42
