Figure 5.10
Negative connector
Positive and negative metal terminals are packed with positive and
NOTE
negative connectors respectively when they are shipped out. After unpacking, keep
the positive and negative ones separate to avoid
confusion.
5.3.2 Connecting DC Power Cables
Step 1
Remove an appropriate length of the insulation layer from the positive and
negative power cables using a wire stripper, as shown in Figure 5.11.
Figure 5.11
Stripping the insulation layer from DC power cables (unit: mm)
Step 2
Insert the exposed area of the positive and negative power cables into the metal
terminals of the positive and negative connectors respectively and crimp them using a
36
