displays
Senergy customer service center.
no output
voltage in
the
inverter.
1.Wait for power restoration;
Inverter
1.Power grid fault;
2. Re-close the output switch, if failure always
off grid
2.Output switch tripping
occurs, please contact Senergy customer service
center.
If you cannot clear the preceding alarm according the measures
NOTE
recommended, contact
Senergy customer service center
timely.
9.3 Removing the Inverter
Perform the following procedures to remove the inverter:
Step 1 Disconnect all cables from the inverter, including communications cables, DC
input power cables, AC output power cables, and PGND cables, as shown in Figure
9.1.
Figure 9.1
Removing DC input connector
Note:
When removing DC input connector, insert the removal wrench to the bayonet,
54
