USER MANUAL – ZC-SG
13
CANOpen LED description
SERVICE (DIAGNOSTIC) LED DESCRIPTION
LED
LED status
Meaning
RUN
Blinking light
Pre-operational mode
Single flash
Stop mode
ON
Operational mode
ERROR
Single flash
At least one error counter has reached or exceed the warning
level
Double flash
Guard event
Triple flash
The SYNC has not received within the configurated
communication cycle timeout period
ON
The CAN controller is bus off
OFF
No error
FAIL
Blinking
Data receiving from RS232/overweight error
ON
Communication error with input channel
POWER
ON
Power supply
Object for analog data
Object 0x6401
contains the 16 bit (signed) values for the weight and the unsigned 16 bit ADC
value.
16 BIT INTEGER INPUT (Object 0x6401)
Subindex
Description
1
Net value signed
2
ADC value
Integer net value
Integer net value (signed): integer approximation of the floating point value.
ADC value
The ADC value scaled into 16 bit (unsigned) value.
Where if ADC = 0x8000 means 0 mV on input.
If ADC = 0xFFFF means max positive mV on input.
If ADC = 0 means max negative mV on input.
