USER MANUAL – ZC-SG
10
Digital out mode
Defines the operation that will cause the switch to ON or OFF for the digital output.
DIGITAL OUT MODE
Value
Description
0
The gross weight exceeds the full scale
1
The weight is stable and the net weight exceeds the
threshold set
2
The weight it is stable
Digital in or out selection
The station can be configured with a digital input or a digital output:
- if IN or OUT selection=1: digital output enable/digital input disabled
- if IN or OUT selection=0: digital input enable/digital output disabled
Object 0x2108: configuration register 2
The object is used to setup the system measure.
CONFIGURATION REGISTER 2
Subindex
Description
1
Sense ratio
2
Cell full scale
3
Known weight value
4
Not used
5
Not used
6
Threshold value
7
Delta weight
8
Delta time
9
ADC speed
10
Resolution in number of points
Sense ratio
Sets the sense ratio for the strain gauge used in [mV/V] (floating point 32 bit format).
Cell full scale
If mode 1 is selected (object 0x2107) sets the full scale of the strain gauge in technical units of
weight (kg, pounds,etc…) (Floating point 32 bit format).
Known weight value
If mode 1 is selected (object 0x2107) sets the value of the weight used for the calibration in
technical units (kg, pounds, etc) (Floating point 32 bit format).
