SCP 2100
– User Manual
Page 57 (62)
– Specifications
SCP 2100
– Base Unit
Includes
–
Display, keypad, embedded controller, chassis/case,
power supply/line cord
System
–
Display Type:
LCD
Keypad:
Snap-dome Membrane
Configurations Allows:
Single Media Gateway
Rear Panel:
Fixed inputs and outputs
Remote Operation/Update Interface
–
Type:
Ethernet, 10/100/1000 Auto Negotiating
Rear Panels indicators:
Link (Green LED), Activity (Amber LED)
Connector:
RJ45
Front Panel Indicators
–
Error LED:
Red indicates error is occurring
Off indicates no errors detected
Input LED:
Green indicates valid input is present
Off indicates no valid input
Monitor and Control Interfaces
–
Web server GUI:
HTTP via web browsing for control & monitoring
Web API full control and monitoring
Front Panel:
System monitoring; limited control
Operating Altitudes
0 to 10000 feet
AC Power
–
Operating Voltage:
100-240VAC
Max Power Draw:
35W
Frequency:
50/60Hz
Connector:
IEC 320 C14
Line Cord:
Detachable, 3-prong
Environmental Conditions
–
Operating Temperature:
32 °F to 122 °F (0 °C to 50 °C)
Cooling:
Software regulated fan
Storage Temperature:
-40 °F to 149 °F (-40 °C to 65 °C)
Relative Operating Humidity:
<95% (non-condensing)
ASI Input
General
–
Connector:
1x BNC, Female
Impedance:
75Ω
ASI Serial TS Input
–
Number of ASI Inputs:
1
Standard:
EN50083-9 (V2:3/98) DVB ASI
Maximum TS Rate:
160 Mb/s
Minimum TS Rate:
250 Kb/s
Packet Sizes
188 Bytes
Modes Supported:
Burst, Byte and Inverted
General
–
Connector:
1x BNC, Female
Impedance:
75Ω
IP Input/Output
General
–
