Sencore SCP 2100, User Manual

Page: 34 / 62

SCP 2100
– User Manual
Page 34 (62)
Setting Range Description
Transmit Enabled
Disabled
Enable or disable the Zixi transmit
Interface Network 1 (eth0)
Network 2 (eth1)
Defines which physical port to use for the Zixi
transmission
Remote Host xxx.xxx.xxx.xxx
Valid Domain Name
Defines the host of the remote broadcast using
an IP address or domain name
Alternate Remote
Host xxx.xxx.xxx.xxx
Valid Domain Name
Defines the alternate host of the remote
broadcast using an IP address or domain name
Stream ID User Entry Defines the Zixi stream ID for the transmitted
stream
Password User Entry Provides the password to allow downstream
devices to receive the Stream ID entered
Ignore TLS
Certificate Error Do Not Ignore
Ignore
Defines whether to cease or continue processing
if TLS Certificate Error is signaled
Maximum
Latency (ms) 30
– 10000
Defines the maximum latency or buffer size in
milliseconds. This should be set to a value
higher than the actual latency on the path.
Encryption Mode
Disabled, AES-128,
AES-192, AES-256,
Automatic Defines which encryption standard to use or if the
SCP 2100 will automatically detect this.
Encryption Key User Entry Defines the encryption key.
Maximum Bitrate
(Mbps)
0.001
– 2147.483
Defines the maximum IP bitrate of the Zixi
transmission in Megabits per second. This
should be set slightly higher than the input
stream rate.
TS Packets Mode
Auto
Manual
In Auto mode, the source will define the number
of TS packets per Zixi packet. In Manual mode,
the user will define the number of TS packets per
Zixi packet.
TS Packets per
Zixi Packet
1
– 7
User defined value for when Manual mode is
enabled.
Bonding Mode Disabled
All interfaces
One Interface
Any Interface
Specifies which interfaces, if any, are to be set to
bonding mode.
Interface
Bonding Box Available for One
Interface Mode
Any Interface Mode
Allows user to define parameters and details
about the port(s) when bonding