SCP 2100
– User Manual
Page 46 (62)
Action
Range
Description
State
Enabled
Disabled
Enable or Disable sending messages to a
Syslog server.
Network Protocol
UDP
TCP
Select which network protocol used to transmit
to the Syslog server
IP Address
Four decimal octets:
XXX.XXX.XXX.XXX
IP of the Syslog server. 0.0.0.0 and
255.255.255.255 are not permitted
Port
0
– 65535
Destination port of the Syslog server
Updating the SCP 2100
4.3.9.1
Applying Software Updates
Updates to the SCP 2100 are performed through the web interface. Software update
files can be obtained by contacting the Sencore ProCare department. Once the update
file is downloaded, it then needs to be uploaded and applied to the unit. To upload
software updates to the unit click on the
button. The current version and
uploaded version are displayed in the Software Versions section. The SCP 2100 will
reboot after a software update is complete.
Figure 32: Unit Update Menu
