SCP 2100
– User Manual
Page 39 (62)
Unit Network Configuration
The management port of the SCP 2100 can be configured from the web interface (as
well as the front panel). To make changes to the management port, click the
button
under the Unit Network Configuration section. The hostname, default gateway and
domain name servers can be configured on the SCP 2100 by clicking the
button. IP address and web address entries are accepted as
Nameserver addresses.
Figure 24: Network Configuration Menu
Clicking the
icon by Network 1 (eth0) or Network 2 (eth1) allows for configuration of
the IP and interface name of each physical RJ45 interface. Each of these menus are
identical as the ports are interchangeable.
NOTE: Exercise extreme caution when performing changes to these menus as
network communication can be lost with the SCP 2100.
