SCP 2100
– User Manual
Page 27 (62)
Destination IP
224.0.0.0
–
239.255.255.255
This setting is only available when receiving
a multicast stream. This is the address the
unit will attempt to join.
Destination Port
0 - 65535
This is the UDP port the source device is
sending to. This is the only setting required
to receive a unicast stream but is also
required for multicast.
IGMP Filter Mode
Exclude
Include
Used on networks supporting IGMPv3. If
this setting is set to
Exclude,
any streams
originating from the user defined IP
addresses will be included in the IGMP
messages and the network will not forward
these streams to the device. If this setting is
set to
Include,
any streams originating from
the user defined IP addresses will be
included in the IGMP messages and the
network will only forward these streams to
the device.
To add an IP address to the IGMP filter list, click the
button. Enter
a valid IPV4 address and click OK. The filter list will show the newly entered address.
Figure 12: IGMP Filter List
To remove any IP from the filter list, click the
icon in the corresponding row. All
addresses can be removed from the IGMP filter list by clicking the
button.
Click the
icon by the MPEG/IP input to view information about the incoming IP
stream. Clicking the
icon will hide the IP statistics.
