SENAO NOA-3570, User Manual

Page: 83 / 123

NOA-3570 User’s Guide
90 Chapter 7 VLAN
Figure 41 VLAN
The following table describes the labels in this screen.
Table 25 VLAN
LABEL DESCRIPTION
Enable VLAN Tagging Select this check box to turn on VLAN tagging.
Use the Wireless screen to set the VLAN ID tag that the NOA-3570 adds to
the Ethernet frames that a WLAN adapter receives from wireless clients or
APs.
Management VLAN ID Enter a number from 1 to 4094 to define this VLAN group. Your management
computer must belong to this VLAN group in order to manage the NOA-3570.
This can be done in the following ways:
•
The management computer could be a wireless client of the NOA-3570 if
the NOA-3570’s WLAN adapter is set to add the add the management
VLAN ID tag to Ethernet frames received from wireless clients.
• The management computer could be on the wired network, behind a
VLAN-aware switch that is configured to add the management VLAN ID
tag to Ethernet frames from the computer before sending them to NOA-
3570.
Note: Mail and FTP servers must have the same management
VLAN ID to communicate with the NOA-3570.
Apply Click Apply to save your changes back to the NOA-3570.
Reset Click Reset to begin configuring this screen afresh.