SENAO NOA-3570, User Manual

Page: 72 / 123

NOA-3570 User’s Guide
Chapter 5 Wireless LAN 79
5.15 Authentication Required: WPA-PSK
Select Authentication Required in the Wireless Port Control field and WPA-PSK in the
Key Management Protocol field to display the next screen.
Figure 34 Wireless LAN: 802.1x/WPA for WPA-PSK Protocol
Table 19 Wireless LAN: 802.1x/WPA for WPA Protocol
LABEL DESCRIPTIONS
Key Management
Protocol
Choose WPA in this field.
WPA Mixed Mode The NOA-3570 can operate in WPA Mixed Mode , which supports both clients
running WPA and clients running dynamic WEP key exchange with IEEE 802.1x in
the same Wi-Fi network.
Select
Enable to activate WPA mixed mode. Otherwise, select Disable .
WPA Group Key
Update Timer
The WPA Group Key Update Timer is the rate at which the AP (if using WPA-
PSK key management) or RADIUS server (if using WPA key management) sends
a new group key out to all clients. The re-keying process is the WPA equivalent of
automatically changing the WEP key for an AP and all stations in a WLAN on a
periodic basis. Setting of the WPA Group Key Update Timer is also supported in
WPA-PSK mode. The NOA-3570 default is 1800 seconds (30 minutes).
Apply Click Apply to save your changes back to the NOA-3570.
Reset Click Reset to begin configuring this screen afresh.