SENAO NOA-3570, User Manual

Page: 39 / 123

NOA-3570 User’s Guide
46 Chapter 3 Wizard Setup
3.4 Wizard Setup: IP Address Assignment
Use this wizard screen to configure IP address assignment for the NOA-3570.
Figure 13 Wizard: IP Address Assignment
The following table describes the labels in this screen.
Key 1 to Key 4 The WEP keys are used to encrypt data. Both the NOA-3570 and the wireless
stations must use the same WEP key.
If you chose
64-bit WEP , then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
If you chose
128-bit WEP , then enter 13 ASCII characters or 26 hexadecimal
characters ("0-9", "A-F").
You must configure all four keys, but only one key can be activated at any one
time. The default key is key 1.
Back Click Back to return to the previous screen.
Next Click Next to continue.
Table 5 Wizard: Wireless LAN Setup
LABEL DESCRIPTION
Table 6 Wizard: IP Address Assignment
LABEL DESCRIPTION
IP Address Assignment
Get automatically from
DHCP
Select this option to have the NOA-3570 use a dynamically assigned IP
address from a DHCP server.
Note: You must know the IP address assigned to the NOA-
3570 (by the DHCP server) to access the NOA-3570 again.
Use fixed IP address Select this option if your NOA-3570 is using a static IP address. When you
select this option, fill in the fields below.