SENAO NOA-3570, User Manual

Page: 37 / 123

NOA-3570 User’s Guide
44 Chapter 3 Wizard Setup
3.3 Wizard Setup: Wireless LAN
Use this wizard screen to configure one of the NOA-3570’s two wireless LAN (WLAN)
adapters to function as an AP (
WLAN 1 is recommended). Use the ADVANCED
WIRELESS screens to configure a WLAN adapter for bridge/repeater functions.
Note: The wireless clients and NOA-3570 must use the same SSID, channel ID and
WEP encryption key (if you enable WEP) for wireless communication.
Table 4 Wizard: General Setup
LABEL DESCRIPTION
System Name It is recommended you type your computer's "Computer name".
In Windows 95/98 click
Start , Settings , Control Panel , Network . Click the
Identification tab, note the entry for the Computer Name field and enter it as the
System Name .
In Windows 2000, click Start , Settings , Control Panel and then double-click
System . Click the Network Identification tab and then the Properties button.
Note the entry for the Computer name field and enter it as the System Name .
In Windows XP, click Start , My Computer , View system information and then
click the Computer Name tab. Note the entry in the Full computer name field
and enter it as the NOA-3570 System Name .
This name can be up to 30 alphanumeric characters long. Spaces are not
allowed, but dashes "-" and underscores "_" are accepted.
Domain Name This is not a required field. Leave this field blank or enter the domain name here
if you know it.
Next Click Next to proceed to the next screen.