SENAO NOA-3570, User Manual

Page: 58 / 123

NOA-3570 User’s Guide
Chapter 5 Wireless LAN 65
5.5.3 AP+Bridge Mode
Click the WIRELESS link under ADVANCED . Select AP+Bridge in the Operating Mode
drop-down list box to display the screen as shown next. In this screen, you can configure the
NOA-3570 to function as an AP and bridge simultaneously. See the section on NOA-3570
applications for more information.
# This is the index number of the bridge connection.
Active Select the check box to enable the bridge connection. Otherwise, clear the
check box to disable it.
Remote Bridge MAC
Address
Type the MAC address of the peer device in a valid MAC address format, that
is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
PSK Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including
spaces and symbols).
When the NOA-3570 is in
Bridge/Repeater mode, you don’t have to enter a
pre-shared key, but the traffic between devices won’t be encrypted if you don’t.
The peer bridge must use the same pre-shared key and encryption method.
Enable Spanning
Tree Protocol (STP)
Select the check box to activate STP on the NOA-3570.
Table 14 Wireless: Bridge/Repeater NOA-3570
LABEL DESCRIPTIONS