SENAO NOA-3570, User Manual

Page: 60 / 123

NOA-3570 User’s Guide
Chapter 5 Wireless LAN 67
When you enable WEP encryption, you can also specify MAC addresses and pre-shared keys
of peer bridges in order to use TKIP (see
Appendix F on page 221 for more on TKIP) to
encrypt traffic between the bridges.
Note: The following screens are configurable only in Access Point and AP+Bridge
operating modes.
5.6 Configuring MAC Filters
The MAC filter screen allows you to configure the NOA-3570 to give exclusive access to up
to 32 devices (
Allow Association ) or exclude up to 32 devices from accessing the NOA-3570
( Deny Association ). Every Ethernet device has a unique MAC (Media Access Control)
address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal
characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address of the
devices to configure this screen.
To change your NOA-3570’s MAC filter settings, click the WIRELESS link under
ADVANCED and then the MAC Filter tab. The screen appears as shown.
Note: Be careful not to list your computer’s MAC address and set the Action field to
Deny Association when managing the NOA-3570 via a wireless connection.
This would lock you out.