508.366.1488 | www.semshred.com
17
Maintenance
Cleaning
Caution:
Always de-energize the unit using proper lockout-tagout (LOTO) procedures when cleaning,
lubricating, or performing any other maintenance, troubleshooting, or repair.
Warning:
NEVER reach into the cutting chamber with bare hands.
Caution:
Always wear proper PPE, including cut resistant gloves, when accessing the cutting chambers.
Tools and PPE Required:
•
Cut resistant gloves, safety eyewear, and a face mask
•
Multi-purpose cleaning solution and rags
•
5/32” Allen wrench
•
Pliers
•
Flat head screwdriver
•
Vacuum cleaner
Frequency:
Every eight hours of operation
1.
Using the Allen wrench, remove four bolts (Figure 7) and remove the feed chute to gain access to the
Stage 1 chamber (Figure 8).
2.
Inspect for any debris outside the cutting chambers.
Note:
Debris outside the cutting chambers indicates a sealing issue that needs to be addressed.
Figure 7. Removing bolts
Figure 8. Removing the feed chute
3.
Using proper PPE, remove any debris built up on cutters and combers and inspect for damage. SEM
recommends using pliers and a screwdriver.
4.
Open cutting chamber front guard door and vacuum any particles from the drawer.
