508.366.1488 | www.semshred.com
24
Note:
Material resting on the screen is not considered to be adequately destroyed. Only material that has
passed through an undamaged screen is considered destroyed.
Figure 19. Location of transition bolts
Figure 20. Removing the screen
Belt Tensioning and Changing
Caution:
Always de-energize the unit using proper lockout-tagout (LOTO) procedures when cleaning,
lubricating, or performing any other maintenance, troubleshooting, or repair.
Accessing the Stage 2 Cutting Chamber Before Tensioning the Belts
Caution:
Always de-energize the unit using proper lockout-tagout (LOTO) procedures when cleaning,
lubricating, or performing any other maintenance, troubleshooting, or repair.
Warning:
NEVER reach into the cutting chamber with bare hands.
Caution:
Always wear proper PPE, including cut resistant gloves, when accessing the cutting chambers.
Tools and PPE Required:
Cut resistant gloves
7/16” and 3/4” wrenches or sockets
5/32” and 3/16” Allen wrenches
1.
De-energize the unit using proper lockout-tag out (LOTO) procedures.
2.
Open the Stage 2 cutting chamber access door. See Figure 21.
Transition
bolts
Nuts to
remove