USERS | Installation
Doc #OI0003 Part #004122 Rev 04 2010
|
9
Who should install this unit
While the SP PRO is designed for easy installation, and can be connected by any suitably
qualified person, to maximize the performance of your system and tailor the programming of
the inverter to your specific needs we recommend you use a Selectronic Authorised Installer.
These selected professionals within the industry have been extensively trained to analyse your
system requirements, design ancillary equipment and have access to specialist support within
Selectronic to assist with your individual requirements.
The voltages produced within your power system may be hazardous. Even though the SP PRO
may derive it’s input from a low voltage battery, the output voltage is just a hazardous as grid
electricity.
All AC connections to the inverter must be carried out by a qualified Electrical contractor or
similar, failure to do so will contravene legal requirements.
All DC wiring must be carried out by a person experienced with DC electrical circuits and must
understand high current low voltage circuits. To ensure an efficient system installation, cable
sizing and voltage drop must be understood.
Selectronic Australia shall have no obligation as to any equipment which has been improperly
installed, stored, or handled, or which has not been operated or maintained according to this
manual, nor for any operating mistakes and consequences arising from them.
This product is not to be used for Life Support equipment.
An inverter or power system which has NOT been installed by appropriately qualified personnel
may have insurance claims refused.
