SP LINK | Using SP LINK
86
|
Doc #OI0003 Part #004122 Rev 04 2010
If you are using an external contactor this output provides a control signal for
actuating the contactor coil.
The next section within Inputs/Outputs covers output activation relating to
the condition of the battery.
HI BATTERY ALERT
initiates the chosen output when the battery voltage
reaches the point set at Hi Battery Alert in the Limits section in the Battery
Settings Limits section.
BATTERY SOC OUTPUT initiates the chosen output when the SoC Assert
Level reaches the programmed level then switches off the output when
the SoC De-Assert Level is reached.
An example of this would be if you wanted to provide a “Computer games
allowed” light for the kids. The light could be switched on when the state
of charge reached, say, 95% and switched off when a lower level was
reached.
This setting is similar to the prior setting but is based on battery voltage
instead of state of charge.
