26
Adjust the line guide vertically so that it is midway
between the line drum flanges. If the casing or line
guard come into contact with the line drum flanges,
unnecessary friction will be caused.
Tighten the screw lightly.
Adjust the alignment of the line guide towards the
first lead block and tighten screw. (See also
”Furling
line arrangement”
. Chapter 6.3, in ”Manual Furlex
400 S & 500 S” (ref. no. 595-116-E).
Fig: 4.3.g
Fig: 4.3.h
3
3
Fig: 4.3.f
Fig: 4.3.e
5.
2
2
1
Push the locking block in until it rests against
the lower bearing assembly. Fasten the line guide
fitting in the line guard and bring this up into the
assembly position. Tighten the screws in the
stainless steel housing.
2
7.
6.
8.