2
T 40
T 30
–
–
This information must be followed to avoid damage to the system and the risk of
personal injury. The 5-year guarantee on the Furlex-system is only valid if the system
is assembled and operated correctly according to the manual.
1 I n t ro d u c t i o n
PLEASE read the entire manual prior to assembly!
Seldén Mast AB guarantees the Furlex-system for 5 years. The guarantee covers faults arising from
defective design, materials or workmanship.
The guarantee is only valid if the Furlex-system is assembled, operated and maintained in accordance
with this manual and is not subjected to loads in excess of those indicated in the brochure and instruc-
tions.
If the system is repaired by anyone other than Seldén Mast AB or one of our authorized dealers, the
guarantee ceases to be valid.
Seldén Mast AB reserves the right to alter the content and design without prior warning.
1 . 1 T h e m a n u a l
This manual covers assembly of the rod forestay and replaces the corresponding headings in the
”Manual Furlex 200 S & 300 S” (ref. no. 595-104-E). resp ”Manual Furlex 400 S & 500 S” (ref. no.
595-116-E).
These instructions is included in Furlex box. See
”Contents”
on Page 3.
It is very important to read both manuals and note any cross references.
All safety-related information is indicated by the following symbol:
The manual covers four different Furlex sizes, 200 S, 300 S, 400 S and 500 S. The assembly pro-
ceedings varies on some points between the different sizes. This is marked in the manual.
The model designation can be found on the line drum top.
All dimensions specified in the manual are in millimetres (mm) unless otherwise indicated.
The screws used for the halyard swivel and lower bearing assembly have a Torx or Allen socket. The
requisite spanners are included with the Furlex. The table below gives the relevant screw sizes and
corresponding sockets.
Skrew Size
Torx Socket
Allen Socket
M 8
M 6
M 5
M10
M12
T 25
–
–
Fig: 1.1.a
–
8 mm
10 mm
Fig: 1.1.b