Selco Genesis 1100, Instruction Manual

Page: 25 / 166

25
8 TECHNICAL SPECIFICATIONS
GENESIS 1100 GENESIS 1500 GENESIS 1500 RC
Power supply voltage U1 (50/60Hz) 1x230V 1x230V 1x230V
Zmax (@PCC) 11m Ω
*
8m Ω
*
8m Ω
*
Slow blow line fuse 16A 16A 16A
Communication bus ANALOG ANALOG ANALOG
Maximum input power (kVA) 4.7kVA 6.6kVA 6.6kVA
Maximum input power (kW) 3.3kW 4.6kW 4.6kW
Power factor PF 0.70 0.70 0.70
Efficiency (µ) 86% 87% 87%
Cos
ϕ
0.99 0.99 0.99
Max. input current I1max (x=30%) 20.4A 28.7A 28.7A
Input current I1 (x=100%) 15A 20.4A 20.4A
Effective current I1eff 11.2A 15.7A 20.4A
Duty factor (40°C)
(x=30%) 110A 150A 150A
(x=60%) 95A 125A 125A
(x=100%) 85A 110A 110A
Adjustment range I2 5-110A 5-150A 5-150A
Open circuit voltage Uo 81 V 85V 85V
Protection rating IP IP23S IP23S IP23S
Insulation class H H H
Dimensions (lxdxh) 260x120x190 mm 260x120x190 mm 260x120x190 mm
Weight 2.5 kg 2.6 kg 2.6 kg
Power supply cable 3x1.5 mm2 3x1.5 mm2 3x1.5 mm2
Length of power supply cable 2 m 2 m 2 m
Normative references EN60974-1/EN60974-10 EN60974-1/EN60974-10 EN60974-1/EN60974-10
Absorbed current with
2.5 mm electrode (80 A @ 40%) 9.2A 9.2A 9.2A
Absorbed current with
3.2 mm electrode (110 A @ 30%) 11A 13A 13A
Absorbed current with
4.0 mm electrode(150 A @ 30%) / 15.7A 15.7A
*
This equipment complies with EN/IEC 61000-3-12 if the maximum permissible mains impedance at the interface point to the public grid
(point of common coupling, PCC) is smaller than or equal to the Zmax stated value. If it is connected to a public low voltage system, it is
the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the
equipment may be connected.