20
●
Operation Procedure: Start of Timer (Ex.: Program 1: 5 minutes and 30 seconds
→
Program 2: 3minutes
and 20 seconds, number of times repeated: 15 times)
Operation
Timer
section
2nd timer
section
Section for
points, etc.
Action/Remarks
Display monitor
1
To start Program 1
Counting is started
with a buzzer sound
(Buzzer)
2
End of Program 1/
Start of Program 2
At the same time as
Program 1 ends,
Program 2 starts
counting with a
buzzer sound.
(Buzzer)
3
To stop Program
To adjust Program time
4
End of Program 2/
Start of Program 1 for 2nd
time
At the same time as
Program 2 ends,
Program 1 starts
counting for 2nd time
with a buzzer sound.
(Buzzer)
5
When all Programs are
completed as designated,
display returns to Program
1 before start.
Timer is automatically
stopped with a buzzer
sound, and display
returns to settings you
made initially.
(Buzzer)
●
Operation Procedure: To End Program Cycles without Counting the Last Program (To skip Program 2 in
the 15th cycle when 15 is set for the number of times repeated)
Operation
Timer
section
2nd timer
section
Section for
points, etc.
Action/Remarks
Display monitor
1
To cancel last Program
“
-
” is added before “P”.
2
When cancellation of last
Program is engaged
After Program 2 is
counted for 15 times,
timer stops
automatically with a
buzzer sound.
(Buzzer)