Seiko KT-601, Operating Manual, Page: 20 / 36

17
4-8 Boxing
(1) Items shown on display panel:
①
Round time, time to sound end-of-round warning
buzzer, interval time, and time to sound
end-of-interval warning buzzer are displayed in the
timer section.
②
Round No. is displayed.
③
Program code representing the program item
shown is displayed.
(2) Items that can be adjusted:
①
Round time, time to sound end-of-round warning buzzer, interval time, and time to sound
end-of-interval warning buzzer can be programmed into memory. They have the following
program code:
Round time: P1, time to sound end-of-round warning buzzer: b1, interval time: P2, and time to
sound end-of-interval warning buzzer: b2
②
The number of rounds can be set as desired (up to 99).
If “0” is set for the number of rounds, the round continues endlessly.
③
The color of the digits indicating Round No. can be selected from red and green.
* For the default settings, refer to 4-14 of this manual.
■ Method of Confirmation/Adjustment of Settings: (Ex.: Round time: 3 minutes, time to sound
end-of-round warning buzzer: 30 seconds before end, interval: 1 minute, and time to end-of-interval
warning buzzer: 5 seconds before end)
Operation Timer
section
2nd timer
section
Section for
points, etc. Action/Remarks Display monitor
1
To activate setting mode
2
To set round time (P1) to 3
minutes, and register
setting Time to sound
end-of-round buzzer
(b1) appears.
3
To set time to sound
end-of-round buzzer (b1) to
30 seconds, and register
setting
Interval time (P2)
appears.
4
To set interval time (P2) to 1
minute, and register setting
Time to sound
end-of-interval buzzer
(b2) appears.
5
To set time to sound
end-of-interval buzzer (b2)
to 5 seconds
6
Number or rounds can be
adjusted.
7
Color of round display can
be selected.
Color of round display
changes alternately
between red and
green.
Color of round on display monitor remains
the same. Color of LED on display panel
will change.
8
To register settings, and
change over to game mode
*1. With each press of button while in the setting mode, the timers can be set to count upward (UP)
and downward (DOWN) alternately. Note that the round No. is counted only upward.
Timer
Round No.
Program code
(for program shown)