2
CAUTION
Do not leave the Product under direct sunlight for a long time. The temperature
inside it may rise excessively to damage the circuit and other parts.
Before connecting the power cord and other cables to the Product, be sure to check
that the power switch is turned off. Do not use any power cord or cable other than
specified. Otherwise, an electric shock or malfunction may be caused.
This Product is equipped with precision electronic circuits. Misuse or abuse, or
rough handling of the Product may adversely affect the performance of such
electronic circuits, causing a malfunction and reducing the serveable life of the
Product.
When the power switch is turned on and off or vice versa in succession, an interval
of at least 5 seconds should be provided between the switch operations.
Before moving the Product, be sure to turn off the power switch. An electric shock
or malfunction may result.
While the Product is not in use, be sure to keep the power plug disconnected from
the outlet. Otherwise, the insulation will be deteriorated to cause an electric shock,
leakage of electricity, or fire.
If any abnormal operation occurs due to an abnormal signal transmitted from outside
or other causes, turn off the power switch, and then turn it on again after at least 5
seconds.
When connecting the cables, insert the plugs properly. Otherwise, a malfunction or
abnormal operation may be caused.
Do not expose the case of the Product to solvents such as alcohol and gasoline,
spray of cosmetics or the like, cleaners, adhesives, or paints. They may discolor,
deteriorate or damage the case due to chemical change.