Seiko KT-601, Operating Manual

Page: 26 / 36

23
6
To release split time
(Ex.: 28 minutes and 32
seconds 56)
Total time
measurement in
progress is displayed.
“SP” is shown on display monitor only
7
To stop Stopwatch
(Ex.: 2 hours, 20 minutes
and 23 seconds72)
Stopwatch is stopped.
“SP” is shown on
display monitor only.
8
To reset Stopwatch
Stopwatch is reset to
“0”.
“SP” is shown on
display monitor only.
● Operation Procedure: To Measure Times of First and Second Runners
Operation Timer
section
2nd timer
section
Section for
points, etc. Action/Remarks Display monitor
1
Select split time display.
“SP” is shown on
display monitor only.
2
To start Stopwatch
Measurement is
started.
“SP” is shown on
display monitor only.
3
To measure time of 1st
runner
(Ex.: 26 minutes and 13
seconds 08)
Time of 1st runner
(not in progress) is
displayed, and
flashing “SP” is
shown.
*Measurement is
continued internally. “SP” flashes on both
display monitor and
display panel.
4
To measure time of 2nd
runner
Time of 1st runner
(not in progress) is
displayed, and “SP”
(not flashing) is
shown.
*Measurement is
continued internally. “SP” is shown on both
display monitor and
display panel.
5
To display time of 2nd
runner
(Ex.: 28 minutes and 32
seconds 56)
Time of 2nd runner is
displayed instead of
that of 1st.
“SP” is shown on both
display monitor and
display panel.
6
To reset Stopwatch
Stopwatch is reset to
“0”.
“SP” is shown on
display monitor only.
● Operation Procedure: To Measure Lap Time
Operation
Timer
section
2nd timer
section
Section for
points, etc.
Action/Remarks Display monitor
1
Select lap time display.
“LP” is shown on
display monitor only.
2
To start Stopwatch
Measurement is
started.
“LP” is shown on
display monitor only.
3
To measure 1st lap time
(Ex.: 26 minutes and 13
seconds 08)
1st lap time (not in
progress) is
displayed, and
flashing “LP” is
shown.
*Measurement is
continued internally. “LP” flashes on both
display monitor and
display panel.
4
To release lap time
(Ex.: 28 minutes and 32
seconds 56) Total time
measurement in
progress is displayed.
“LP” is shown on display monitor only.
5
To measure 2nd lap time
(Ex.: 23 minutes and 9
seconds 27)
2nd lap time (not in
progress) is
displayed, and
flashing “LP” is
shown.
*Measurement is
continued internally. “LP” flashes on both
display monitor and
display panel.
(6)
Display can be changed
over to split time as
required.
Split time is
displayed.
Flashing “SP” is
shown. “SP” flashes on both
display monitor and
display panel.