Seiko KT-601, Operating Manual, Page: 25 / 36

22
4-11 Stopwatch
(1) Items shown on display panel:
①
Up 199 hours, 59 minutes, and 59 seconds 99 can
be measured and displayed.
②
The times of the first and second runners, and the
first and second lap times are measured and
displayed.
③
Lap time (LP)/split time (SP) marks are displayed.
(2) Items that can be adjusted:
①
Display can be changed over between lap time (LP)
and split time (SP) displays.
* For the default settings, refer to 4-14 of this manual.
■ Method of Confirmation/Adjustment: Changeover between Lap and Split time displays
Operation Timer
section
2nd timer
section
Section for
points, etc. Action/Remarks Display monitor
1
Select Stopwatch.
“LP” is shown on display
monitor only.
2
Display can be changed
over between lap and split
time displays.
“SP” is shown on
display monitor only.
*1. Changeover of displays between lap and split times can be made even while the stopwatch
measurement is in progress. By pressing button, “LP” and “SP” appears and disappears
alternately, and the corresponding measurement is displayed.
● Operation Procedure: To Measure Elapsed Time (Standard Measurement)
Operation
Timer
section
2nd timer
section
Section for
points, etc.
Action/Remarks Display monitor
1
Select Stopwatch.
Either lap or split time
display can be used.
“LP” is shown on display
monitor only.
2
To start Stopwatch
Measurement is
started.
“LP” is shown on display
monitor only.
3
To stop Stopwawtch
(Ex.: 18 seconds 08) Measurement is
stopped.
“LP” is shown on display
monitor only.
4
To reset Stopwatch
Stopwatch is reset to
“0”.
“LP” is shown on display
monitor only.
*1. After measuring 199 hours, 59 minutes, and 59 seconds 99, the Stopwatch continues measurement
from “0”.
● Operation Procedure: To Measure Split Time (SP)
Operation Timer
section
2nd timer
section
Section for
points, etc. Action/Remarks Display monitor
1
Select split time display.
“SP” is shown on
display monitor only.
2
To start Stopwatch
Measurement is
started.
“SP” is shown on
display monitor only.
3
To measure split time
(Ex.: 26 minutes and 13
seconds 08)
Measured split time
(not in progress) is
displayed, and “SP”
flashes.
*Measurement is
continued internally.
“SP” flashes on both
display monitor and
display panel.
(4)
Display can be changed
over to lap time as required. Lap time is displayed,
and “LP” flashes.
“LP” flashes on both
display monitor and
display panel.
(5)
To return to split time
display Split time is displayed,
and “SP” flashes.
“SP” flashes on both
display monitor and
display panel.
Minute and second
digits of time
1/100-second
digits of time
LP/SP mark
Hour digits of
time