ERROR DISPLA
Y
DRIVE BOARD FAULT DETECTED OVERCURRENT ALARM
Excess current was sent to the motor.
Confirm that there are no abnormalities with the wiring to the motor.
DRIVE BOARD FAULT DETECTED OVERHEAT/OVERLOAD ALARM
The motor’s thermal indicator was activated.
Confirm that the motor has proper cooling.
[Test Mode and Communications Errors]
ERROR OCCURRED CONNECTION TIMEOUT
The communications check did not succeed within 3 minutes.
Check the connection of the network cables.
Confirm that all of the cabinets to connect to network play are displaying the network check screen.
Confirm that number of TOTAL MACHINE in Game Test Mode matches the number of cabinets to connect to
network play.
Confirm that the LINK_ID of each cabinet within the same group has a consecutive number, starting from 1.
Confirm that there are no units with the same LINK_ID within the same group
ERROR OCCURRED REGION IS NOT COHERENT
The TOTAL MACHINE setting in Game Test Mode is wrong.
Confirm that the number of connected cabinets matches the number of TOTAL MACHINE.
ERROR OCCURRED LINK ID ERROR
An incorrect LINK_ID was specified.
Using Game Test Mode, confirm that the LINK_ID is not higher than the number specified by TOTAL MACHINE.
ERROR OCCURRED VERSION ID IS NOT COHERENT
The game software versions of connected cabinets do not match.
Confirm that the software version installed on each connected cabinet is the same.
FIG. 5a Drive Board inside the DLP Base
