EXPLANA
TION OF TEST
AND DA
TA
DISPLA
Y
E. CONTROL TOWER COMMUNICATION TEST
This test allows you to confirm the status of communications with the control tower. Periodically use this screen to
verify the proper operation of the control tower.
If Control Tower Status shows “OK,” there are no abnormalities in the communications with the control tower.
If “NG” is showed, please confirm the following items:
- Is the power of the tower control board turned on?
- Is the tower control board’s DIP SW set to Test Mode?
If so, set it to standard mode.
- Is the DIP SW, which corresponds to a cockpit displaying “NG” due to the tower control board DIP SW, set to
“ON”?
If so, set the corresponding DIP SW to OFF.
- Is the wiring from the cockpit, which displays “NG”, to the control tower properly connected?
(Confirm proper connection of the DLP coupling box connector.) (Confirm proper connection of the control
tower connector.)
Press the SERVICE and TEST Buttons simultaneously to return to the Game Test Mode Screen.
CONTROL TOWER COMMUNICATION TEST
Control Tower Status : OK
Control Tower is connect to Actuator control board.
PRESS TEST AND SERVICE TO EXIT
FIG. 3-3e Control Tower Communication Test Screen
