0
EXPLANA
TION OF TEST
AND DA
TA
DISPLA
Y
(1) Acuator Status
L CW LIMIT SWITCH:
This displays the status of the limit switch of the actuator on the lower left side.
OFF: The limit switch is off.
ON: The limit switch is on.
It will show ON when the actuator is operated and the L actuator is at its lowest position.
L CCW LIMIT SWITCH:
This displays the status of the limit switch of the actuator on the upper left side.
OFF: The limit switch is off.
ON: The limit switch is on.
It will show ON when the actuator is operated and the L actuator is at its highest position.
R CW LIMIT SWITCH:
This displays the status of the limit switch of the actuator on the lower right side.
OFF: The limit switch is off.
ON: The limit switch is on.
It will show ON when the actuator is operated and the L actuator is at its lowest position.
R CCW LIMIT SWITCH:
This displays the status of the limit switch of the actuator on the upper right side.
OFF: The limit switch is off.
ON: The limit switch is on.
It will show ON when the actuator is operated and the L actuator is at its highest position.
L ACTUATOR:
Displays the current position of the left actuator.
R ACTUATOR:
Displays the current position of the right actuator.
The tolerance zone is from 0 to 160mm. This is the distance from the detector for the CCW direction limit switch.
When outside of this tolerance zone, adjustment of the limit switch is required. Also, because the value displayed is
an electronic position reading, the ride’s actual position and inclination could vary. Therefore, the limit switch may
require adjustment even if the value displayed is within the tolerance zone.
If for example both left and right sides display 100mm, but the ride is tilted anyway, there is most likely some
abnormality responsible.
If limit switch adjustment is required, request the work be done by the office listed in this manual or by the point of
purchase.
