PRECAUTIONS REGARDING PRODUCT OPERA
TION
Game Start
1
Confirm that the control tower motion selector switch on the service panel is set to NORMAL (or STOP for
customers that do not meet the height or physical condition requirements), and confirm that the error lamp is
extinguished.
2
Press the respective ENTRY button one time for the rides where customers are sitting. Pressing the ENTRY
button twice will cancel the entry, but pressing it again allows entry once again.
3
After completing the entries for rides with network play, press the START button. The customers’ game
screens will change to the Setup Screens.
4
When deciding on the number of players at the Selection of Number of Drivers Screen, the screen will
pause and the attendant’s input is required. If the player count is acceptable, press the ENTRY button once.
If the driver count is wrong, hold down the ENTRY button for at least three seconds. Driver count selection
will be cancelled, and the game will return to the Selection of Number of Drivers Screen.
(Only in OPERATION MODE: TICKET1)
(1)
Main switch
This switch allows the service panel to be operated. If it is not set to ON, the service panel cannot be used.
(2)
ENTRY
button
These buttons enable any desired cabinet to be entered into a game. When the button flashes, the corresponding
cabinet is in an entered status. It is possible to cancel the entered status by pressing the same button once again.
(3)
START button
This button finalizes the entries of the cabinets into the game and starts the game.
During the game, the ENTRY buttons will glow until the game has completed.
NOTE:
When the OPERATION MODE is set to
COIN, pressing the START button with one
or more cabinets entered while they are at
the “ Waiting for entries.” screen will result
in the countdown being cancelled (FIG.
1-2c Waiting for entries.) and the waiting
time extended. Pressing the START button
once again will immediately start the game
with the cabinets that have entered.
FIG. 1-3b SERVICE PANEL
FIG. 1-3c
